EM 450 / SP Serie
The solution for in line signatures finishing
 |
|
 |
|
 |
|
All above outputs are based on 80gsm plain paper and will vary pending on the nature of the document, the operator skills, the work organisation. Best punching quality is obtained with paper thickness not exceeding 1.5mm
Description
The EM range features the state of the art modular system for punching and cutting signatures.
The EM450 is the entry level for signature punching applications with all format settings done by manual adjustments and max speed of 10,000 cycles / hour. It can also be combined with the EMC module equipped with lateral knives (1 right, 1 left and 1 central knife) to trim signatures punched on the EM450.
The EM450 can be run in line behind any folding machine through the dedicated RS450 interface. It can also be fed off line from the SF feeder.
The EM450 can be operated with a single action tool for punching only applications or with a double action tool which allows to punch on the folded edge a perforation line and on the unfolded edge one or more tear-off perforations, straight cuts or index tabs in one sequence.
The EM450SP has got all set up programmable and fully dynamic. Its speed of up to 12,000 cycles / hour enables it to be run in line with the latest generation of high speed folding machines through the dedicated RS450 SP interface.
Like the EM450, the EM450SP can be operated with a single action tool or with a double action tool.
Additional information
| Activity | Binderies |
|---|---|
| Application | Punching operations only |
| Format | A4 / 11" |
Tools
| Description | Patterns |
| Wire-O® Ø 4mm – 3:1 pitch or Sq.holes 4x4mm – 3:1 pitch |  |
| Wire-O® Ø 4mm – 3:1 pitch or Sq.holes 4x4mm – 3:1 pitch with n°3p thumbcut |  |
| Wire-O® Ø 6mm – 2:1 pitch or Sq.holes 6x6mm – 2:1 pitch |  |
| Spiral Ø3 or 3.2mm – 5mm pitch Spiral Ø4mm – 6.35mm pitch |  |
| Spiral 4x3mm – 5mm pitch Spiral 4x5mm – 6.35mm pitch |  |
| Plastic 7x4mm or 8x3mm rect.holes 9/16″ or ½” pitch |  |
| Combi Wire-O® punching & Tear-off perforation |  |
| Tear-off / Snap out |  |
| T-Slot Square holes 4x4mm – 3:1 pitch |  |
| Universal : 4 oval + 5 Ø holes |  |
| 4 holes Ø 6mm, 80mm pitch |  |
| Ø 2mm up to 10mm |  |
| Habilclass: 4x1mm – 10mm pitch |  |
| Index / Tab cutting |  |
| Round corner |  |
| Corner perforation |  |
| Others | On-demand |
Specs Sheet
