Navigation
Equipment for cutting tabs, dividers or round corners
A comprehensive range or equipment for cutting tabs, dividers or round corners
Onglematic 3: The Onglematic O3 is a simple & very affordable manual tab index & divider cutter for loose leaves. It can also be used as a straight cutting device – guillotine.
Available tab shapes : 15° angle / 90° angle / 90° angle with round corner Inside.
Cutting thickness up to 15 sheets(80 gsm).
Fixed pre-defined tab lengths : the position of the holes is calculated so the length of each tab is identical (from 2 to 12 tabs for 297mm long sheet).
Onglematic 5: The Onglematic O5 is a simple, yet powerful electric tab index & divider cutter for loose leaves. It is available with pre-set tab lengths in O5 Standard version or with programmable variable lengths in O5P & O5-A3 versions. It can also be used as a straight cutting device -guillotine.
Cutting thickness up to 15 sheets(80 gsm).
Available tab shapes : 15° angle / 90° angle / 90° angle with round inside / double round corner.
Onglematic 7: The Onglematic O7 is a versatile & cost-effective table top electric tab index cutter for bound documents or loose leaves & divider cutter. It is able to produce 60 bound documents of 10 chapters with about 150 sheets (80gsm) or 550 sets of 9 dividers (220gsm) per hour. Cutting thickness up to 20 sheets(80 gsm).
Variable tab lengths with storage of up to 64 programmes.
Bound document clamping device
Available tab shapes : 15° angle / 90° angle / 90° angle with round inside
& 1/2″ double round corner.
DCR400 : The DCR400 is a compact machine designed for any material with multiple round corners, ranging from books, note pads, diaries, cards,…
the right and left corners can be cut simultaneously in a single stroke. The cutting thickness of up to 100mm combined with a speed of up to 24 cycles / minute provide optimum output for a one man operation.
It is the ideal solution for medium to long runs with a regular output.
