Versatile high speed automatic punch

  • Punching width : from 110mm (4.3″) to 610mm (24″)
  • Punching thickness : up to 2.5mm
  • Mechanical speed : selectable up to 7,200 cycles / hour
  • Punching output : up to 180,000 sheets / hour

All above outputs are based on 80gsm plain paper and will vary pending on the nature of the document, the operator skills, the work organisation. Best punching quality is obtained with paper thickness not exceeding 1.5mm


The range of EX610 high speed automatic punching machines is designed to accommodate the widest possible punching applications for large size runs. Running at up to 7,200 cycles / hour, it is the fastest punching machine in its range. Continuous paper loading speeds productivity to provide a true output of up to 120,000 sheets (80gsm) / hour including loading & unloading operations.

The EX610 machine range punches virtually any type of stock and material that will be retained in their pre-collated sequence. It will perform all types of punching works on up to 3 lines, tab cutting or corner perforation. The EX machine range can be equipped with either high pile reception or variable speed conveyor for continuous delivery or a simple jogger.

With the Punch Anywhere option, the EX610 can even punch holes in the middle of the sheets. and with the nail hole option, it can punch suspension holes for calendars simultaneously with the Wire-O® perforation line.

Beside the standard EX610 version, the EX610 is also available in the EX610 Duplex version with a double reception system and a board feeder that will take thick & rigid boards.

Fast and simple to set up and operate with quick tool change over. Sheets are automatically aligned both ways with micro adjustment. One direction, one level, permanent sheet transport control and absence of contact of transport belts during punching ensure precision punching and unmarked sheets.





, , ,


Punching types
Description Patterns
Wire-O® Ø 4mm – 3:1 pitch or Sq.holes 4x4mm – 3:1 pitch
Wire-O® Ø 4mm, square holes 4x4mm or rect – pitch 3:1” (8.47mm) with thumb cut or Euro-slot
Wire-O® Ø 6mm, square holes 6x6mm or rect – pitch 2:1” (12,7mm)
Metal spiral Ø3mm, 3.2mm or 4mm – pitch 5:1” (5mm) or 4:1” (6.35mm)
Plastic or metal spiral, oval holes – pitch 5:1” (5mm), 0,2475” (6.29mm), 6.30mm or 4:1” (6.35mm)
Plastic comb 7x4mm or 8x3mm rect holes. pitch 9/16″ (14,29mm) or ½” (12,7mm)
Combined with 2 perforation lines : Wire-O® or spiral & Tear-off perforation
Combined with3 perforation lines : Wire-O® or spiral & Tear-off perforation, Tear-off & ring binder holes 4-trous
Tear-off / Snap out
T-Slot (square or round holes)
Universel ring binder : 4 oval holes + 5 round holes
4 trous Ø 6mm, pas 80mm 4-trous
Ø from 2mm up to 10mm
Habilclass: 4x1mm – 10mm pitch
Index / Tab cutting
Round corners with 5 (3/16″) to 12.5mm (1/2″) radius
                  Euro slot                           Window slot
Encoche de rainage 330mm / 680mm
Corner perforation with 5 (3/16″) to 12.5mm (1/2″) radius

Spec Sheet

Quotation request